The seed extractor is mainly composed of a frame, a feeding hopper, a crushing box, a separating bucket, a cleaning bucket, a seed receiving frame, a rear supporting wheel and a bearing, a sprocket, and a chain.
Maintenance in use
1. After the first 4 hours of work, check whether all bolts and nuts are tight;
2. For all rotating positions (such as bearings, sprockets, chains, etc.), oil or grease must be added every 4 hours;
3. Check every day whether there are weeds and vines entangled in the crushing box and separating barrel, and clean up if necessary;
4. Before long-distance transportation and after each shift, all threaded connections should be thoroughly inspected. If any tightening bolts are loose, they should be tightened immediately.
5. Check and add butter once every work shift.
6. Important: Check each work component for any deformation or damage. If any problem is found, it should be corrected, repaired or replaced in time.
7. Eliminate sand and debris on the machine every day to prevent early corrosion.
FAQ
1.Q: Output of small pumpkin seed removing machine/output of large pumpkin seed removing machine
A:3-5 tons of pumpkin per hour, 500kg of pumpkin seeds per hour./15-20 tons per hour
2.Q: The working principle of the pumpkin seed extractor
A:There is a crushing device at the feed inlet of the machine. After crushing, the pumpkin meat will come out from one side, and the pumpkin seeds and flesh will enter the sieve cylinder. There is a stirring device in the sieve cylinder to separate the seeds and the flesh, and the flesh will flow out from the hole of the sieve cylinder. Seeds will flow out from the other side of the screen.
3. Q:Supporting machine
A:Cleaner, dryer
4. Q:Can handle melon
A:Pumpkin, watermelon, zucchini, sweet melon,
white gourd;
5. Q:Main markets
A:Mexico, Australia, the United States, Malaysia, Morocco, etc.
Audited Supplier 
){kind=link}
){kind=link}