Automatic Plastic Crusher Recycling Waste Plastic Scrap Crushing Machine

• Customization: Available
• After-sales Service: Online Support
• Warranty: 1 Year
• Model NO.: SL-800
• Type: Hard Plastic Crusher
• Raw Material: PE
• Structure: Top Feed
• Knife Classification: Piece Knife Crusher
• Knife Roll: Solid Knife Roller
• Automation: Non-Automatic
• Computerized: Non-Computerized
• Certification: CE
• Power: 30kw
• Capacity: 600-1200kg/H
• Knives: 10PCS
• Power(Kw): 45/55
• Transport Package: Wooden Case
• Trademark: Shuliy
• Origin: China
• Production Capacity: 100PCS/Month
• Package Size: 225.00cm * 200.00cm * 270.00cm
• Package Gross Weight: 5500.000kg

Product Description

Introduction:

Plastic crushers are mainly used to crush various thermoplastics and rubbers, such as plastic profiles,
pipes, rods, threads, films, and waste rubber products. The pellets can be directly used for extrusion and
injection molding.

Product Parameters

 

model	size(mm)  length * width * height	power(kw)	output(kg/h)	weight(kg)	discharge size(mm)
400	900x1100x1550	11	400-600	550	6-20
600	1200x1100x1750	15/18.5	600-1000	850
800	1750x1550x2000	30/37	1000-2000	1400
1000	1950x1900x2250	37/45	2000-3000	1800
1200	2250x2000x2700	45/55	3000-4000	5500

Operation attention of plastic shredder

1. The plastic pulverizer and power unit should be installed firmly. If the plastic crusher needs to be fixed
for a long time, it should be fixed on the cement foundation; if the plastic crusher needs to be flown, the
unit should be installed on the frame made of angle iron, and ensure that the power engine (diesel engine
or electric motor) and plastic The pulley grooves of the crusher are in the same rotation plane.

2. After the plastic crusher is installed, check the fastening of each fastener, and tighten it if it is loose. At
the same time, check whether the belt tightness is appropriate.

3. Before starting the plastic crusher, first turn the rotor by hand to check whether the operation of the claws,
hammers and the rotor is flexible and reliable, whether there is any collision in the crushing chamber, whether
the rotation direction of the rotor is consistent with the direction pointed by the machine, and whether the
power machine and plastic Whether the crusher is in good condition.

4. Do not replace the pulley casually, in case the rotating speed is too high to cause a crushing chamber, or the
rotating speed is too low to affect the working efficiency of the pulverizer.

5. After the plastic shredder is started, it should be kept idling for 2~3 minutes first, and there is no abnormal
phenomenon before feeding work.

6. Pay attention to the operation of the plastic crusher at any time during the work. First, the feeding should be
uniform to prevent the crushing chamber from being blocked; secondly, do not overload the work for a long time.
If it is found that there is vibration, noise, high temperature of the bearing and the body, and material spraying out,
it should be stopped immediately for inspection, and the work can be continued after troubleshooting.