Complete Sawdust Wood Charcoal Briquette Production Line

Product Description

 

High efficient bamboo charcoal production line coconut shell briquette production line  

Product Description

 

The charcoal production line can use wood, branches, rice husks, olive dregs, straw, sawdust, wood chips and so on as raw materials, then through the crush, dry, form and carbonize, at last, you can get charcoal. The charcoal is usually used to cook or domestic bbq.

Machine Application

 

Charcoal production steps:

1. Use the drum chipper machine to crush your wood log or branches into wood chips, the size of the wood chips normally is 5cm.
2. Put the wood chips into the hammer mill machine, the hammer mill machine can crush them into sawdust, the final size of the sawdust should less than 3-5 mm, then they are easy to shape.
3. Through the rotary dryer machine, to dry the sawdust. The moisture content of sawdust should less than 8-12%. If the moisture content bigger than 12%, they are too wet, will wear the inside of the sawdust briquette machine, but if they are less than 8%, they will hard to shape.
4. After drying, we need to put the sawdust into the sawdust briquette machine, through high temperature and high pressure, the biomass briquettes will be produced.
5. At last, we can use the hoisting carbonization furnace. Put the biomass briquettes into a carbonization furnace, then use wood or coal as a heating source to heat the machine, after 8-10 hours, you can get the charcoal.

This machine can crush wood log, discarded furniture plates, branches and so on into wood chips, the size is about 5cm. There are blades and screens inside this machine. The blades can crush raw materials, the screen can control the final size of wood chips.
This hammer mill machine can crush wood chips, strew and some small raw materials. There are hammers and screens inside this machine. Hammers can crush raw materials into sawdust, then the screen can control the final size of the sawdust. Usually, if you plan to use the sawdust to produce biomass briquettes, you need to ensure that their size less than 3-5mm.

Rotary dryer machine uses wood, coal, or waste wood board as heating source, then heat the machine. Put the raw materials into this machine, the fan can drive the hot air to move forward. There is a scraper inside the drum, and the material moves forward as the drum rotates.
This sawdust briquette machine can use sawdust which is smaller than 3-5mm , and the rice husks as raw materials, through high temperature and high pressure, you can get the biomass briquettes. This sawdust briquette machine is a new, rear-hold design that allows for better maintenance and convenience by controlling the propeller from the rear.

Hoisting carbonization furnace can use wood,coal or other waste wood board as a heating source can carbonize biomass briquettes, wood, coconut shells,and some hard things. During the carbonization, the raw materials will be pyrolysis, which can produce flammable gas. Then the flammable gas can be recycled to provide heat to the carbonizing furnace. After 8-10 hours, you can get charcoal.